Fastly will be adding capacity at our Columbus (CMH) POP. End-users may observe connection resets as traffic is migrated onto new hardware starting on 03 October 2024 at 18:30 UTC.

Our estimated duration is 2h. 

When this change is applied, customers may observe additional origin traffic as new cache nodes retrieve content from origin. Please verify that your origin access lists allow the full range of Fastly IP addresses (https://docs.fastly.com/en/guides/accessing-fastlys-ip-ranges). Customers with any questions or concerns should contact Fastly’s Support team (support@fastly.com).

The scheduled maintenance has been completed.

To offer feedback on our status page, click "Give Feedback" 

We are investigating elevated errors to our Platform delivery services.

Our engineers are continuing to investigate the impact to our Platform delivery services.

Our engineers have identified the contributing factor and are applying a fix to our Platform delivery services.

Our engineers have identified the contributing factor and are continuing to apply the mitigation strategy to our Platform delivery services.

Engineering has deployed a fix and have confirmed a gradual recovery to our Platform delivery service. We will continue to monitor until we’ve confirmed that customer experience has been fully restored.

Engineering has confirmed that our Platform delivery services have been fully restored. Customers may have experienced elevated errors and latency. In addition, Compute customers may have also experienced delayed configuration deployments from the 5th of September at 19:48 to the 6th of September at 00:48 UTC.

This incident is resolved.

Affected customers may have experienced impact to varying degrees and to a shorter duration than as set forth above.

To offer feedback on our status page, click "Give Feedback" 

At approximately 08:00 UTC our engineers began to investigate a large traffic event impacting performance within our Europe and North America regions. 

Standard traffic engineering practices have been deployed in response to this event, in an effort to reduce the potential impact to our customers within the regions. Customer may continue to see elevated errors and latency as mitigation efforts continue to be deployed.

All other products and services are unaffected by this incident.

Our engineers are implementing adjusted mitigation strategies in our North America and Europe regions to continue to balance traffic and manage performance.

Error rates and latency have improved, although customers may still experience intermittent periods of performance impact as traffic engineering continues to be deployed.

Engineering has implemented mitigation strategies and has confirmed a gradual recovery in our North America and Europe regions. 

We are closely monitoring performance in these regions as a top priority as this event continues and will provide a final update once customer and end user experience has been fully restored.

Engineering has confirmed that Europe and North America regions have been fully restored. Customers may have experienced elevated errors and latency from 08:00 to 16:37 UTC.

This incident is resolved.

Affected customers would have experienced impact to varying degrees and to a shorter duration than as set forth above.

To offer feedback on our status page, click "Give Feedback" 

We're currently investigating performance issues with our Real Time Analytics and Historical Stats services at our Columbus (CMH) Point of Presence (POP).

All other services are unaffected.

Our engineers have identified the contributing factor and are applying a fix to Real Time Analytics and Historical Stats services at our Columbus (CMH) Point of Presence (POP).

All other locations and services are unaffected.

Engineering has confirmed the impact to Real Time Analytics and Historical Stats services at our Columbus (CMH) Point of Presence (POP) has been mitigated.

Engineering has confirmed that Real Time Analytics and Historical Stats services at our Columbus (CMH) Point of Presence (POP) has been fully restored. Customers may have experienced a delay or dropped observability product data from. 01:15 to 04:05 UTC.

This incident is resolved.

Affected customers may have experienced impact to varying degrees and to a shorter duration than as set forth above.

We're investigating elevated errors in Columbus (CMH).

All other locations and services are unaffected

Fastly Engineering has identified a third party service provider issue that caused elevated latency and increased errors for customers within the Columbus (CMH) Point of Presence (POP). Engineering has rerouted customer traffic around the impacted region and services be gradually restoring across our network. 

We will continue to monitor the actions of the third party service provider and will resolve our status post once we've seen full recovery from the provider.

Update: An earlier status post: https://www.fastlystatus.com/incident/376077 has been closed. As the elevated errors observed when access our Control Plane (manage.fastly.com) and API services has been correlated to the third party service provider issue identified within this status post.

This incident has resolved.

During this incident, customers would have experienced increased latency and elevated 5xx errors in our Columbus (CMH) POP, as well as, elevated errors when attempting to access configuration management and API services through our Control Plane from 18:40 to 21:30 UTC.

Affected customers may have experienced impact to varying degrees and to a shorter duration than as set forth above.

Fastly Engineering has confirmed that our network availability and Control Plane services have been fully restored.

Fastly will be adding capacity at our Columbus (CMH) Point of Presence (POP). End-users may observe connection resets as traffic is migrated onto new hardware, starting on 25 August 2023 at 12:00 UTC. 

Our estimated duration is 4h.

When this change is applied, customers may observe additional origin traffic as new cache nodes retrieve content from origin. Please verify that your origin access lists allow the full range of Fastly IP addresses (https://docs.fastly.com/en/guides/accessing-fastlys-ip-ranges).

Customers with any questions or concerns should contact Fastly’s Support team at https://support.fastly.com. 

In order for customers who use this POP as an Origin Shield to leverage new cache nodes for an expanded cache footprint, customers can either apply a new config version at a time of their choosing, or their shielding configuration will be updated on their behalf 7 days after this maintenance window closes.

The scheduled maintenance has been completed. 

We're currently investigating performance impacts in Europe, North America.

All other locations and services are unaffected.

This issue has been identified and a fix is being implemented. 

A fix has been implemented and we are monitoring the results.

This incident has been resolved.

We're currently investigating potential impact to performance with our CDN services.

A fix has been implemented and we are monitoring the results.

This incident has been resolved.

Fastly will be adding capacity at our Columbus (CMH) data center. End-users may observe connection resets as traffic is migrated onto new hardware.

In order for customers who use this POP as an Origin Shield to leverage new cache nodes for an expanded cache footprint, customers can either apply a new config version at a time of their choosing, or their shielding configuration will be updated on their behalf 7 days after this maintenance window closes.

When this change is applied, customers may observe additional origin traffic as new cache nodes retrieve content from origin. Please be sure to check that your origin access lists allow the full range of Fastly IP addresses (https://docs.fastly.com/en/guides/accessing-fastlys-ip-ranges). Customers with any questions or concerns should contact Fastly’s Support team (support@fastly.com). 

Scheduled maintenance is currently in progress. We will provide updates as necessary.

Fastly is aware of an expected critical vulnerability the OpenSSL project is expected to disclose in the near future. We are studying the currently available information surrounding this vulnerability and do not currently believe that Fastly is vulnerable. We will continue to monitor as additional information is released and will provide our customers with more information as available.

Fastly has reviewed the initial notification from OpenSSL regarding CVE-2022-3786 and CVE-2022-3602. We have analyzed the versions of OpenSSL in use at Fastly, and verified that we do not use OpenSSL 3.x. Fastly and customer usage of Fastly services are not vulnerable to CVE-2022-3786 or CVE-2022-3602.